Specification
Operating temperature：－10℃ to 40°C
Warm up time：3-4 minutes at 20℃
Voltage (charging)：90-260VAC, 50/60Hz
Data Output：Excel compatible data via USB memory stick.4GB internal data storage allowing for approximately 1 year of continuous monitoring.
Sample connections：Rectus fitting
Gas flow range：100-1000ml.min'
Display：7” (18cm) full colour LCD display withtouch screen operation
Analyser dimensions：L: 480mmxW: 360mmxD: 180mm
Weight：8. 5kg (Total instrument and case)
Battery：In excess of 8 hours with 4-6 hour charge time
Printer：Integrated thermal printer
SF6-Sulpher Hexafluoride：0-100%±0. 5% full-scale accuracy
H2O-Dew Point：－60℃ to+20Cdp±2°Cdp accuracy of reading
SO2-Sulphur Dioxide：0-100ppm±2% full-scale reading
HF-Hydrogen Fluoride：0-10ppm 1ppm accuracy
CF4-Tetrafluoromethane：0-80%±1% full-scale reading
Air：0-100%±5% of full-scale reading
CO-Carbon Monoxide：0-1000ppm±2%full-scale accuracy
H2S-Hydrogen Sulphide：0-100ppm±5%full-scale accuracy
Measurement time：3-5 Minute Fully automatic
Advantage
Modular design allows for bespoke sensor combination upon request
Lithium battery provides up to eight hours of operation
Housed within a heavy-duty IP66 case with a total weight of 8.5 kg
7” (180mm) full-colour touch screen interface with soft menu keys
Pre-programmed with all current IEC and CIGRE test configurations, with the ability to create customised parameters
All data is continuously logged and Excel compatible data can be downloaded via a USB memory stick
Operates on any worldwide mains voltage (90-260VAC)
Thermal printer provides on-site test results
Multi-language (Please contact for details)
Detail
The G47 is a battery-powered SF6 multigas analyser capable of measuring multiple gases simultaneously in a rugged and portable case. Depending on the configuration the analyser can measure up to eight parameters including sulphur hexafluoride (0-100% SF6), sulfur dioxide (0-100ppm SO2), dew-point (-65/20°Cdp H2O), carbon tetrafluomethane (0-60% CF4), hydrogen fluoride (0-10ppm HF), air (0-100%), carbon monoxide (0-100ppm) and hydrogen sulphide (0-100ppm). In addition the SF6 compartment gas pressure is displayed on-screen as well as some other selectable parameters. The analyser has a built-in PC and all functions are accessed via a 7” touch screen panel. The analyser will run in continuous or sampling modes where sample gas is drawn into the analyser via a special FEP lined sample hose and DILO couplings. The gases pass through the various sensors and data is processed and displayed on the screen. The analyser is fitted with a printer, alarms, data-logging functions and USB output. The portability of the analyser is achieved by means of a lithium battery pack which can be charged on any worldwide mains power. The unit will run for in excess of eight hours on the battery before recharging is required. The unit will also run directly on mains power while the battery is recharging.
